Eltek Network Utility *********************** Eltek Network Utility is a Windows application used to search for and show information about Eltek devices in your network. The application can be used to configure the IP settings, upgrade the software or to configure settings on your units. Simple access to web interface for each device found in your network is also available. The network communication uses the UDP protocol on port 20034 for IP configuration and software upgrade. Json protocol on port 80 is used for configuration of settings. For secure transfer of firmware, port 990(FTPS) and port 22(SFTP) are used. Eltek Network Utility is a �Click-Once� application and can be downloaded from http://msm.eltek.com/ENU/ or installed from CD. The following prerequisites are required: - Microsoft .NET Framework 4.5.2 (x86 or x64) Installations with prerequisites included, have all the required files to install ENU on a system without the prerequisites. For minimum installations (prerequisites not included), the required files has to be downloaded separatly from Microsoft.com, if needed. /******************************************************************************************************/ For installations run from a CD, please read the following section: In most cases, a software installer will start automatically. If not, double-click on the setup.exe file. Description of the <.zip> content - autorun.inf Configuration file that tells the operating system which executable to start, in this installation it is setup.exe. - ENU.application ClickOnce application file - Install/run the application. Use this if the required prerequisites is present. - setup.exe Setup program to verify/install prerequisites before installing the application. - ENU - Software License Terms.pdf License agreement document. Read this carefully before installing. By installing and using this software you accept the terms and conditions in this document. - Eltek Network Utility readme.txt This file. - Application Files folder Deployed files used by the installation process. - For installations with prerequisites included - dotnetfx452\NDP452-KB2901907-x86-x64-AllOS-ENU.exe Microsoft .NET Framework 4.5.2 (x86 and x64) installation. /******************************************************************************************************/ - To upgrade software across the network on Smartpack2 version 2.0 and higher, Eltek Network Utility is required. - Software upgrade is only possible for devices with IP address set according to your custom network settings. /* Program History */ Release 3.2.5 - Fix problem download config changelog - Task Sceduler - Update SSH library to support latest security standards - Mitigate compatibility issues with SmartPack fw 2.12 IP data types. Release 3.2.4 - Fix incorrect sorting on IP address. - Include IP addresses ending with .0 and .255 in IP range search. Release 3.2.3 - Fix problem with read revision and send config file to old Smartpack with webpower. Release 3.2.2 - Remove warning "The configuration file should be generated from PowerSuite version 3.4 or higher." - Cosmetic changes - use msm.support@eltek.com to request license. Release 3.2.1 Bugfix - Fix Problem with upgrading of cry-files for Nburn product with firmware version >= 2.10 Release 3.2 Increased functionality: - Command line FW upgrade feature - Certified configuration via SSH - Added XSRF token handling Release 3.1 Increased functionality: - Smartpack R Support - Smartpack2 Touch Image upload - FTP firmware upload for SPS, SP2 and Compack - Security updates - Selection of IP addresses from file import - Command line for controller configuration Bugfix - Allow to upload firmware from locations with read access - Correction of date sorting Release 3.0 Increased functionality: - Security updates - New ID protocol update for Eltek controllers with firmware version 2.6.2 and up - XML file upload improvement - Support SP2 Touch controller Release 2.1 Increased functionality - Increased ip range search to include Class B search - Added more security when upgrading/downgrading software. o Added bootloader check when upgrading software on Compack o Added file system upgrade check when updating the software on a COmpack or a Smartpack2. - Added progressbar to indicate progress during search for units. - Added the possibility to cancel a search Bug fix - Software upgrade will be aborted if the selected file is missing the device information /******************************************************************************************************/ Release 2.0.1 Bug fix - IP configuration of devices with ip addresses outside the network settings (typical default ip address) has been fixed. /******************************************************************************************************/ Release 2.0 New functionality: - Added system configuration from xml file using json to one or several devices in the network. The xml configuration file should be generated from PowerSuite version 3.4 or higher. - Improved sw upgrade routine. o Better indication of when a controller is up running after upgrade. o Added safe mode (wait to upgrade next until the previous is up running. - Support sw upgrade in Valere legacy devices(BC, XC, NIC, etc.) and devices with non default authentication. - Added a �Units selected� counter in main view. - Added a recent search list. - Show lost and new items after refresh in main view. - Added device name change. - Improved license handling . Bug fix - In version 1.0 some units could be missed out on a new search. Improved search routine to handle this in a better manner. - IP address/DHCP changes will be updated in the main window on new search for items already in the list. Known limitations: - Device name change on Compack require sw version higher than 1.05. /******************************************************************************************************/ Release 1.0: First version of the application Known bugs: - Ip address/DHCP changes in the Ip config window will not be updated in the main window list unless the user first clear the device list and then start a new device search. - The net mask may be shown incorrectly in ENU when the device is configured with DHCP.